Top-Ten List success
-
- Posts: 194
- Joined: Fri Mar 19, 2021 12:21 pm
- x 37
- x 95
Top-Ten List success
I just noticed that the top-ten list is open. It's only been open for eight days and already they have TWO ideas posted!
- jcapriotti
- Posts: 1852
- Joined: Wed Mar 10, 2021 6:39 pm
- Location: The south
- x 1196
- x 1984
Re: Top-Ten List success
Good chance to get your idea in the top ten if only ten get submitted. Mine will be to kill CloudWorks and move development budget back to DesktopWorks.
Jason
Re: Top-Ten List success
I would log into that mess to vote for that.
-
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
https://r1132100503382-eu1-3dswym.3dexp ... qzPql2Bi_wjcapriotti wrote: ↑Tue Nov 16, 2021 6:24 pm Good chance to get your idea in the top ten if only ten get submitted. Mine will be to kill CloudWorks and move development budget back to DesktopWorks.
Ask and ye shall receive. Now go vote for it, ya'll.
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
- mattpeneguy
- Posts: 1386
- Joined: Tue Mar 09, 2021 11:14 am
- x 2489
- x 1899
Re: Top-Ten List success
I voted to "transfer this idea to an app"...mike miller wrote: ↑Wed Nov 17, 2021 7:49 am https://r1132100503382-eu1-3dswym.3dexp ... qzPql2Bi_w
Ask and ye shall receive. Now go vote for it, ya'll.
You know they are going to remove that idea if it gets too much traction...
Re: Top-Ten List success
My 1st grade reading skills read that as "...will be to kill ClownWorks and move..." Just anotehr Munday morning.jcapriotti wrote: ↑Tue Nov 16, 2021 6:24 pm Good chance to get your idea in the top ten if only ten get submitted. Mine will be to kill CloudWorks and move development budget back to DesktopWorks.
Honestly, they need to hire you with a stupid high salary just so you can name stuff for them.
Example;
Customer: "CloudWorks. What is that?"
Sales: "It's Solidworks on the cloud."
Customer: "Oh, so is there still a Solidworks like we're used to?"
Sales: "Yep, that's called DesktopWorks now, same product as before though."
Customer: "Ok, thanks for the clarity."
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
It would be absolutely hilarious if they let it go (of course Matthew Hall will kill it as soon as he logs on...) I'm positive if left alone by DSS it would make it into the Top Ten, if not number one.mattpeneguy wrote: ↑Wed Nov 17, 2021 8:25 am I voted to "transfer this idea to an app"...
You know they are going to remove that idea if it gets too much traction...
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
Re: Top-Ten List success
bnemec wrote: ↑Wed Nov 17, 2021 9:15 am My 1st grade reading skills read that as "...will be to kill ClownWorks and move..." Just anotehr Munday morning.
Honestly, they need to hire you with a stupid high salary just so you can name stuff for them.
Example;
Customer: "CloudWorks. What is that?"
Sales: "It's Solidworks on the cloud."
Customer: "Oh, so is there still a Solidworks like we're used to?"
Sales: "Yep, that's called DesktopWorks now, same product as before though."
Customer: "Ok, thanks for the clarity."
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
- - -Randy Pausch
Re: Top-Ten List success
It's good to see they made it a seamless, self-explanatory, and easy to use interface so that as many people as possible can submit their thoughts.
- jcapriotti
- Posts: 1852
- Joined: Wed Mar 10, 2021 6:39 pm
- Location: The south
- x 1196
- x 1984
Re: Top-Ten List success
Dammit Mike, you went and made me go log back into that atrocious website. I don't regret it but I feel there is a stinky film over me I can't wash off.mike miller wrote: ↑Wed Nov 17, 2021 7:49 am https://r1132100503382-eu1-3dswym.3dexp ... qzPql2Bi_w
Ask and ye shall receive. Now go vote for it, ya'll.
2021-11-17 07_47_59.jpg
Jason
Re: Top-Ten List success
Here's mine.
-
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
Re: Top-Ten List success
I think you've been hanging out with Cam Newton. Refund, or Re-fund?mike miller wrote: ↑Wed Nov 17, 2021 7:49 am https://r1132100503382-eu1-3dswym.3dexp ... qzPql2Bi_w
Ask and ye shall receive. Now go vote for it, ya'll.
2021-11-17 07_47_59.jpg
-
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
- jcapriotti
- Posts: 1852
- Joined: Wed Mar 10, 2021 6:39 pm
- Location: The south
- x 1196
- x 1984
-
- Posts: 423
- Joined: Tue Mar 09, 2021 10:11 am
- x 439
- x 233
Re: Top-Ten List success
Wow, @dave.laban - thank you for all those links in the top 10. I will vote on all of them.
-
- Posts: 194
- Joined: Fri Mar 19, 2021 12:21 pm
- x 37
- x 95
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
Well, I tried. Incredibly popular with users, very unpopular with "Management".
EDIT: of course, I'm not shocked....who would be?
EDIT: of course, I'm not shocked....who would be?
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
- bentlybobcat
- Posts: 64
- Joined: Tue Sep 21, 2021 8:43 am
- x 3
- x 48
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
You're welcome! I figure if the TTL is temporary we might as well use their permanent system.berg_lauritz wrote: ↑Wed Nov 17, 2021 1:25 pm Wow, @dave.laban - thank you for all those links in the top 10. I will vote on all of them.
- AlexLachance
- Posts: 2174
- Joined: Thu Mar 11, 2021 8:14 am
- Location: Quebec
- x 2353
- x 2008
Re: Top-Ten List success
Seeing the number of ideas that have been implemented in the last 20 years coming from these Top10 lists kind of removes any will to participate for me. It's all just a publicity stunt to stir the pot and bring people's hope up.
- Glenn Schroeder
- Posts: 1518
- Joined: Mon Mar 08, 2021 11:43 am
- Location: southeast Texas
- x 1754
- x 2126
Re: Top-Ten List success
Howdy Alex,AlexLachance wrote: ↑Thu Nov 18, 2021 8:57 am Seeing the number of ideas that have been implemented in the last 20 years coming from these Top10 lists kind of removes any will to participate for me. It's all just a publicity stunt to stir the pot and bring people's hope up.
Far be it from me to defend the folks at Dassault, but yesterday I was looking back at my "Solidworks Wish List" that I've been keeping for quite a while, and I was surprised to see how many of them had been implemented. I'm not saying they were all implemented well, but at least they had made an effort.
"On the days when I keep my gratitude higher than my expectations, well, I have really good days."
Ray Wylie Hubbard in his song "Mother Blues"
Ray Wylie Hubbard in his song "Mother Blues"
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
After Scott's "One and Two" thread got canned (seemingly because whoever is masquerading as Top Ten List Admin doesn't know what it means) I've created these two to explicitly call out what is needed.
https://r1132100503382-eu1-3dswym.3dexp ... jCx8XvxEvg
https://r1132100503382-eu1-3dswym.3dexp ... NVlHKpoFXA
https://r1132100503382-eu1-3dswym.3dexp ... jCx8XvxEvg
https://r1132100503382-eu1-3dswym.3dexp ... NVlHKpoFXA
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
Oh also this one too for the Online Licensing fans.
https://r1132100503382-eu1-3dswym.3dexp ... fZjtnFXCoQ
https://r1132100503382-eu1-3dswym.3dexp ... fZjtnFXCoQ
-
- Posts: 423
- Joined: Tue Mar 09, 2021 10:11 am
- x 439
- x 233
Re: Top-Ten List success
a "3" is somewhat connected to this:dave.laban wrote: ↑Thu Nov 18, 2021 10:17 am After Scott's "One and Two" thread got canned (seemingly because whoever is masquerading as Top Ten List Admin doesn't know what it means) I've created these two to explicitly call out what is needed.
https://r1132100503382-eu1-3dswym.3dexp ... jCx8XvxEvg
https://r1132100503382-eu1-3dswym.3dexp ... NVlHKpoFXA
Streamline the UI/keystrokes for all features etc.
Sometimes you use the mouse button, sometimes tab, sometimes "a", sometimes you can not really go to the next field without using your mouse.......
Is that more 'fixing bugs' or optimize?
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
I get a rather cynical kick out of the TTL Admin's pre-canned response to undesirable feedback: "Thank you for submitting this idea. We greatly value your feedback." [in fact, we value it so much that we are going to scrap it.....]
We shouldn't shoot the messenger, but some days it's pretty tempting.
We shouldn't shoot the messenger, but some days it's pretty tempting.
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
-
- Posts: 184
- Joined: Wed Apr 14, 2021 11:18 pm
- x 109
- x 154
Re: Top-Ten List success
I'm continuing with the theme from previous '3D experience' top ten years (is this the third now??) and not taking part. It's just encouraging them that the platform is a success.
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
Ahem.
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
-
- Posts: 423
- Joined: Tue Mar 09, 2021 10:11 am
- x 439
- x 233
Re: Top-Ten List success
This is golden!
Re: Top-Ten List success
You kiss @$$.
Anyone wager someone with all caps last name takes him seriously?
-
- Posts: 194
- Joined: Fri Mar 19, 2021 12:21 pm
- x 37
- x 95
Re: Top-Ten List success
I would bet a dollar that D'Assault won't delete that one, but will allow it to go through voting.
-
- Posts: 36
- Joined: Wed Jul 28, 2021 9:09 am
- x 1
- x 31
Re: Top-Ten List success
They did try that one year & they fell flat on their face even though the beta testers told them it didn't work with their new so called "colorblind" light blue/lighter blue/light grey color scheme that it gave everyone headaches trying to figure out what was what because there was little to no contrast to tell anything apart. I'd opt to stay with the colors they've had for the last 20 some years.
- Glenn Schroeder
- Posts: 1518
- Joined: Mon Mar 08, 2021 11:43 am
- Location: southeast Texas
- x 1754
- x 2126
Re: Top-Ten List success
Too bad there's no way to use purple text on that "platform".
"On the days when I keep my gratitude higher than my expectations, well, I have really good days."
Ray Wylie Hubbard in his song "Mother Blues"
Ray Wylie Hubbard in his song "Mother Blues"
- AlexLachance
- Posts: 2174
- Joined: Thu Mar 11, 2021 8:14 am
- Location: Quebec
- x 2353
- x 2008
Re: Top-Ten List success
Someone had posted a link to the Top10 from the last 20 years, and I counted, if I recall, 13 ideas being implemented out of 200. That's not a very good number, but to be fair, One and two were part of those ideas, so there were probably others that could have somewhat been filtered out.Glenn Schroeder wrote: ↑Thu Nov 18, 2021 10:05 am Howdy Alex,
Far be it from me to defend the folks at Dassault, but yesterday I was looking back at my "Solidworks Wish List" that I've been keeping for quite a while, and I was surprised to see how many of them had been implemented. I'm not saying they were all implemented well, but at least they had made an effort.
- Glenn Schroeder
- Posts: 1518
- Joined: Mon Mar 08, 2021 11:43 am
- Location: southeast Texas
- x 1754
- x 2126
Re: Top-Ten List success
Yeah, 13 out of 200 isn't a very good average. I guess I just got lucky on the ratio on my personal list.AlexLachance wrote: ↑Fri Nov 19, 2021 8:38 am Someone had posted a link to the Top10 from the last 20 years, and I counted, if I recall, 13 ideas being implemented out of 200. That's not a very good number, but to be fair, One and two were part of those ideas, so there were probably others that could have somewhat been filtered out.
"On the days when I keep my gratitude higher than my expectations, well, I have really good days."
Ray Wylie Hubbard in his song "Mother Blues"
Ray Wylie Hubbard in his song "Mother Blues"
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
Out of curiosity I'm planning to record the top ten each Friday when I first log in. This is the top ten as of this morning:
Re: Top-Ten List success
There has always been a lot of hostile feedback, but lately, this looks different. There is a growing focus from customers on the bigger business direction, less on the product details. This signals a change, but is it a change in the customers, DS, or both? I don't imagine anyone sees this as good news... well, maybe some people, but no one directly involved.dave.laban wrote: ↑Fri Nov 19, 2021 8:49 am Out of curiosity I'm planning to record the top ten each Friday when I first log in. This is the top ten as of this morning:
image.png
Blog: http://dezignstuff.com
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
I mean, 4 of those ideas have already been canned and won't be progressing through to the "official" voting phase in January because they're not core SW functionality. Will just be interesting to see how high up the TTL they are even with just the votes at this point.matt wrote: ↑Fri Nov 19, 2021 10:05 am There has always been a lot of hostile feedback, but lately, this looks different. There is a growing focus from customers on the bigger business direction, less on the product details. This signals a change, but is it a change in the customers, DS, or both? I don't imagine anyone sees this as good news... well, maybe some people, but no one directly involved.
Re: Top-Ten List success
I have been a blunt (some would say harsh) critic of the TTL ever since they took it off the Jive platform. I have been pleading with them to make some simple but helpful changes to make it less painful, but it seems their mantra is along the lines of "The beatings will continue until morale improves." I cannot bring myself to participate in its current state.Glenn Schroeder wrote: ↑Thu Nov 18, 2021 10:05 am Howdy Alex,
Far be it from me to defend the folks at Dassault, but yesterday I was looking back at my "Solidworks Wish List" that I've been keeping for quite a while, and I was surprised to see how many of them had been implemented. I'm not saying they were all implemented well, but at least they had made an effort.
That said, I'd like to follow-up what Glenn just said about implemented improvements. The TTL is just the list of ideas that get the top ten in votes from each year. The SWX development team does pay attention to all the suggestions for improving the software (though apparently they ignore ALL the suggestions for improving the Experience). A lot of these suggestions over the years have been implemented, but they just did not make it into the top ten in votes and therefore lacked that notoriety.
In a way the TTL is like a Kaizen sprint for enhancements. However, one of the big problems with the TTL is that these ideas are only temporary for us to see, disappearing right before SWXWorld starts (and yes, that is my passive-aggressive protest at their de-emphasizing SWX when they renamed World). Another BIG problem withe the TTL is that these ideas do not get an SPR assigned to them as they would if they were submitted as an Enhancement Request. @dave.laban has been kind enough to not only point this out, but to also add links to related SPR's. Thanks, Dave!!
I don't like wading into their swamp. I submit that the one in D.C. is not the only one that needs to be drained.
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
- - -Randy Pausch
-
- Posts: 194
- Joined: Fri Mar 19, 2021 12:21 pm
- x 37
- x 95
Re: Top-Ten List success
Interesting that seven of the top ten are related to either fixing the company, including undoing past mistakes, or the top-ten process. Only three are about software improvements.dave.laban wrote: ↑Fri Nov 19, 2021 8:49 am Out of curiosity I'm planning to record the top ten each Friday when I first log in. This is the top ten as of this morning:
image.png
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
You're right!Uncle_Hairball wrote: ↑Thu Nov 18, 2021 5:55 pm I would bet a dollar that D'Assault won't delete that one, but will allow it to go through voting.
It also seems that some people have ZERO sense of either humor or sarcasm. So I was forced to double down.......
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
Re: Top-Ten List success
The response you got just makes your TTL idea all the more appropriate! Great job!mike miller wrote: ↑Fri Nov 19, 2021 8:00 pm You're right!
It also seems that some people have ZERO sense of either humor or sarcasm. So I was forced to double down.......
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
- - -Randy Pausch
Re: Top-Ten List success
Attached for reference are the 2020 TTL submissions in case you wish to repost previous TTL ideas.
The zip file contains the Swamp's HTML page that I saved at the end.
In the zip are "3DSwym SOLIDWORKS Top Ten 3DExperience World 2020.html" and its linked folder of the same name.
This folder contains all of the various page bits so that the rendering is accurate.
Extract both to the same location and double click the html file.
Just the summary is shown for each idea as this was all that was available from the main ideas page.
But if a link is visible, double-clicking it will take you there (assuming the URL is still valid or accessible).
Also attached is an Excel summary of these same ideas and their authors.
I didn't partake in last year's TTL so I have no similar data.
The zip file contains the Swamp's HTML page that I saved at the end.
In the zip are "3DSwym SOLIDWORKS Top Ten 3DExperience World 2020.html" and its linked folder of the same name.
This folder contains all of the various page bits so that the rendering is accurate.
Extract both to the same location and double click the html file.
Just the summary is shown for each idea as this was all that was available from the main ideas page.
But if a link is visible, double-clicking it will take you there (assuming the URL is still valid or accessible).
Also attached is an Excel summary of these same ideas and their authors.
I didn't partake in last year's TTL so I have no similar data.
- Attachments
-
- 3DSwym SOLIDWORKS Top Ten 3DExperience World 2020.zip
- (5.11 MiB) Downloaded 144 times
-
- TTLParseIdeas 2019-12-01.xls
- (31.5 KiB) Downloaded 126 times
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
Looks like one of the Top Ten List admins forgot what account they were logged in to at some point so could be a useful user to tag in to a comment if anything need clarification.
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
Also, I assumed when I got this email "moderated from" meant "deleted":
However I got another one shortly after and then, holy smokes, they've actually let this idea go through to the next stage. Was NOT expecting that.
However I got another one shortly after and then, holy smokes, they've actually let this idea go through to the next stage. Was NOT expecting that.
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
I've got a new idea for the TTL that would be very popular with users at least.......Sell Desktopworks to Siemens, let DSS keep 3DEXERIENCE, because all the users want that anyway. Siemens is smart enough to know where their bread is buttered, unlike the DSS execs. Now Siemens would really have a corner on the CAD market with SWX, SE, and NX. Heh, they could even make the programs talk back and forth and share files.
Just a pipe dream....but still interesting to think about.
Just a pipe dream....but still interesting to think about.
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
Re: Top-Ten List success
And just what are you smokin' in that there pipe, Mike?mike miller wrote: ↑Mon Nov 22, 2021 7:55 am I've got a new idea for the TTL that would be very popular with users at least.......Sell Desktopworks to Siemens, let DSS keep 3DEXERIENCE, because all the users want that anyway. Siemens is smart enough to know where their bread is buttered, unlike the DSS execs. Now Siemens would really have a corner on the CAD market with SWX, SE, and NX. Heh, they could even make the programs talk back and forth and share files.
Just a pipe dream....but still interesting to think about.
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
- - -Randy Pausch
- mike miller
- Posts: 878
- Joined: Fri Mar 12, 2021 3:38 pm
- Location: Michigan
- x 1070
- x 1231
- Contact:
Re: Top-Ten List success
Okaaaaaayyyyy. Several questions:
1) I thought the TTL was only for SWX. Adding other software just dilutes it. On second thought, maybe that's intentional.
2) xShape hasn't had a fillet tool until now?!?!?
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
-
- Posts: 320
- Joined: Thu Mar 11, 2021 8:38 am
- x 48
- x 390
Re: Top-Ten List success
It was in the announcement thread that it was covering more than DesktopWorks.mike miller wrote: ↑Mon Nov 22, 2021 9:16 am 2021-11-22 09_11_23.jpg
Okaaaaaayyyyy. Several questions:
1) I thought the TTL was only for SWX. Adding other software just dilutes it. On second thought, maybe that's intentional.
2) xShape hasn't had a fillet tool until now?!?!?
Re: Top-Ten List success
The title does say TTL Swamp World 2022, so no surprise.mike miller wrote: ↑Mon Nov 22, 2021 9:16 am 2021-11-22 09_11_23.jpg
1) I thought the TTL was only for SWX. Adding other software just dilutes it. On second thought, maybe that's intentional.