What are you machining on your cnc today?

Toolpaths, cutters, schemes, software. hardware, etc.
User avatar
FMAAID
Posts: 56
Joined: Tue Mar 30, 2021 1:47 pm
Answers: 0
x 2
x 63

What are you machining on your cnc today?

Unread post by FMAAID »

A housing and a cooling plate for the semi conductor insdustry

Used AlphaCam part created in SW.

316 stainless
Attachments
ASM-HOUSING.png
ASM-COOLING-PLATE.png
User avatar
FMAAID
Posts: 56
Joined: Tue Mar 30, 2021 1:47 pm
Answers: 0
x 2
x 63

Re: What are you machining on your cnc today?

Unread post by FMAAID »

A clamp for our CNC belt rewebbing machine.

304l material, used a custom tool to make the knurll
Attachments
CLAMP-3INCH-03.png
CLAMP-3INCH-02.png
CLAMP-3INCH-01.png
20210614_151343.jpg
MattW
Posts: 58
Joined: Wed May 12, 2021 12:39 pm
Answers: 2
x 5
x 31

Re: What are you machining on your cnc today?

Unread post by MattW »

It holds a transducer. I have the good fortune of mostly cutting parts I designed, so any problems are my fault. The electrical guy I am working with on this project is saying scary things, like 200V at 20 MHz
IMG-4313 r.jpg
IMG-4314 r.jpg
IMG-4316 r.jpg
All the pics originally showed up upside down. The last two still show up upside down even though I have saved versions with the pictures flipped.
User avatar
DennisD
Posts: 705
Joined: Fri Mar 12, 2021 10:04 am
Answers: 1
Location: Near Jacksonville, FL
x 1028
x 1467

Re: What are you machining on your cnc today?

Unread post by DennisD »

MattW wrote: Wed Oct 20, 2021 7:49 pm It holds a transducer. I have the good fortune of mostly cutting parts I designed, so any problems are my fault. The electrical guy I am working with on this project is saying scary things, like 200V at 20 MHz
IMG-4313 r.jpgIMG-4314 r.jpgIMG-4316 r.jpg

All the pics originally showed up upside down. The last two still show up upside down even though I have saved versions with the pictures flipped.
Just come back to him with "Oh, yeah! Well how about 1.21 GW!!"
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
MattW
Posts: 58
Joined: Wed May 12, 2021 12:39 pm
Answers: 2
x 5
x 31

Re: What are you machining on your cnc today?

Unread post by MattW »

Working on my picture frame game, which needs it.
image.png
image.png
image.png
image.png
User avatar
SPerman
Posts: 2035
Joined: Wed Mar 17, 2021 4:24 pm
Answers: 14
x 2207
x 1860
Contact:

Re: What are you machining on your cnc today?

Unread post by SPerman »

We use our CNC router to cut custom shims, among other things.

-
I may not have gone where I intended to go, but I think I have ended up where I needed to be. -Douglas Adams
Post Reply