Solidworks Smart Mates for Dowel Pin on Blind Hole

es2058
Posts: 6
Joined: Sun May 07, 2023 7:15 am
Answers: 0
x 1

Solidworks Smart Mates for Dowel Pin on Blind Hole

Unread post by es2058 »

Is there a way to get smart/reference mate for the chamfered end of a dowel pin to a blind hole. There is no issue on a thru hole since it's a edge to surface or surface to surface but can't seem to get pin bottom (chamfer side) to the 118° cone surface of the blind hole to mate. Doing this with regular round edge and cone surface is no problem but would like to have a smart mate to drag and drop the dowel pin into into the blind hole of a part.

Any ideas?
image.png
colt
Posts: 56
Joined: Tue Mar 30, 2021 5:43 pm
Answers: 0
x 14
x 22

Re: Solidworks Smart Mates for Dowel Pin on Blind Hole

Unread post by colt »

You can use a face mate reference if you edit the chamfer of the dowel to 31° so as to match the angle of the cone. Of course the depth will be slightly off...

materef.jpg
Post Reply