Batch export to Iges/Step based on Display States

[Bradfordzzz]

Has anyone seen a macro that would be able to batch export the items in each display state?
I would like them to be in a separate iges and step file and name the files base on the assembly and display state name.
This might already exist, I just haven't been able to find one yet.
Is this even possible?

Thanks.
Mark

[Stefan Sterk]

Hi Bradrordzzz,

Have you seen this macro from codestack.net?
https://www.codestack.net/solidworks-api/import-export/export-multi-formats/

Only need some changes, so it adds the name of the current/active display state to the name.

[Bradfordzzz]

Hi Bradrordzzz,

Have you seen this macro from codestack.net?
https://www.codestack.net/solidworks-api/import-export/export-multi-formats/

Only need some changes, so it adds the name of the current/active display state to the name.

Thanks Stefan! It looks like this one will only export configurations .. but not display states.
I have seen a few of these, but cant find any that will work with display states.

[Stefan Sterk]

Thanks Stefan! It looks like this one will only export configurations .. but not display states.
I have seen a few of these, but cant find any that will work with display states.

Like a said, you would need to make some changes to the code.

Use the following line for for OUT_NAME_TEMPLATES

Code: Select all

OUT_NAME_TEMPLATES = Array("<_FileName_>_<_DispName_>.stp", "<_FileName_>_<_DispName_>.igs")

And add some lines to the ResolveToken function as is shown below.

Code: Select all

Function ResolveToken(token As String, model As SldWorks.ModelDoc2) As String

	...
	Const DISP_NAME_TOKEN As String = "_DispName_"
	...
	Select Case LCase(token)
		...
		Case LCase(DISP_NAME_TOKEN)
			ResolveToken = model.ConfigurationManager.ActiveConfiguration.GetDisplayStates()(0)
		...
	End Select

End Function

I haven't tested it myself, but just let me know if you run into some issues.


EDIT: Made the changes my self, see code below.

Code: Select all

'**********************
'Copyright(C) 2024 Xarial Pty Limited
'Reference: https://www.codestack.net/solidworks-api/import-export/export-multi-formats/
'License: https://www.codestack.net/license/
'**********************

Const ALL_CONFIGS As Boolean = False
Const OUT_FOLDER As String = ""
Const STEP_VERSION As Long = 214 '203 or 214
Const PDF_3D As Boolean = False 'True to export 3D PDF

Dim OUT_NAME_TEMPLATES As Variant

Dim swApp As SldWorks.SldWorks

Sub main()
        
    Dim origStepVersion As Long
        
    'OUT_NAME_TEMPLATES = Array("PDFs\<_FileName_>_<_ConfName_>_<PartNo>.pdf", "IMGs\<_FileName_>_<_ConfName_>_<PartNo>.jpg")
    OUT_NAME_TEMPLATES = Array("<_FileName_>_<_DispName_>.stp", "<_FileName_>_<_DispName_>.igs")
    
    Set swApp = Application.SldWorks
    
try_:
    On Error GoTo catch_
    
    Dim swModel As SldWorks.ModelDoc2
    Set swModel = swApp.ActiveDoc
    
    If swModel Is Nothing Then
        Err.Raise vbError, "", "Please open document"
    End If
    
    If swModel.GetPathName() = "" Then
        Err.Raise vbError, "", "Please save the model"
    End If
    
    Dim outFolder As String
    
    If Not TryGetOutDirFromArguments(outFolder) Then
        outFolder = OUT_FOLDER
    End If
    
    ReadOptions origStepVersion
    SetupOptions STEP_VERSION
    
    ExportFile swModel, OUT_NAME_TEMPLATES, ALL_CONFIGS, outFolder
    
    GoTo finally_
    
catch_:
    swApp.SendMsgToUser2 Err.Description, swMessageBoxIcon_e.swMbStop, swMessageBoxBtn_e.swMbOk
finally_:

    SetupOptions origStepVersion

End Sub

Sub ReadOptions(ByRef stepVersion As Long)

    stepVersion = swApp.GetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP)
    
End Sub

Sub SetupOptions(stepVersion As Long)
    
    If False = swApp.SetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP, stepVersion) Then
        Err.Raise vbError, "", "Failed to set Step Export version to " & stepVersion
    End If
    
End Sub

Sub ExportFile(model As SldWorks.ModelDoc2, vOutNameTemplates As Variant, allConfigs As Boolean, outFolder As String)
    
    Dim i As Integer
    Dim j As Integer
    
    Dim curConf As String
    
    If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
        Dim swDraw As SldWorks.DrawingDoc
        Set swDraw = model
        curConf = swDraw.GetCurrentSheet().GetName
    Else
        curConf = model.ConfigurationManager.ActiveConfiguration.Name
    End If
    
    Dim vConfs As Variant
    
    If allConfigs Then
        If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
            vConfs = model.GetSheetNames()
        Else
            vConfs = model.GetConfigurationNames()
        End If
    Else
        Dim sConfs(0) As String
        sConfs(0) = curConf
        vConfs = sConfs
    End If
    
    For i = 0 To UBound(vConfs)
    
        If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
            curConf = swDraw.ActivateSheet(CStr(vConfs(i)))
        Else
            model.ShowConfiguration2 CStr(vConfs(i))
        End If
                
        For j = 0 To UBound(vOutNameTemplates)
            
            Dim errs As Long
            Dim warns As Long
        
            Dim outNameTemplate As String
            outNameTemplate = vOutNameTemplates(j)
            
            Dim outFilePath As String
            outFilePath = ComposeOutFileName(outNameTemplate, model, outFolder)

            Dim outDir As String
            outDir = Left(outFilePath, InStrRev(outFilePath, "\"))
    
            CreateDirectories outDir
            
            Dim swExportData As Object
            
            If LCase(GetExtension(outFilePath)) = LCase("pdf") Then
                Dim swExportPdfData As SldWorks.ExportPdfData
                Set swExportPdfData = swApp.GetExportFileData(swExportDataFileType_e.swExportPdfData)
                swExportPdfData.ViewPdfAfterSaving = False
                swExportPdfData.ExportAs3D = PDF_3D
                Set swExportData = swExportPdfData
            Else
                Set swExportData = Nothing
            End If
            
            If False = model.Extension.SaveAs(outFilePath, swSaveAsVersion_e.swSaveAsCurrentVersion, swSaveAsOptions_e.swSaveAsOptions_Silent + swSaveAsOptions_e.swSaveAsOptions_Copy, swExportData, errs, warns) Then
                Err.Raise vberrror, "", "Failed to export to " & outFilePath
            End If
            
        Next
        
    Next
    
    If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
        curConf = swDraw.ActivateSheet(curConf)
    Else
        model.ShowConfiguration2 curConf
    End If
    
End Sub

Function ComposeOutFileName(template As String, model As SldWorks.ModelDoc2, outFolder As String) As String

    Dim regEx As Object
    Set regEx = CreateObject("VBScript.RegExp")
    
    regEx.Global = True
    regEx.IgnoreCase = True
    regEx.Pattern = "<[^>]*>"
    
    Dim regExMatches As Object
    Set regExMatches = regEx.Execute(template)
    
    Dim i As Integer
    
    Dim outFileName As String
    outFileName = template
    
    For i = regExMatches.Count - 1 To 0 Step -1
        
        Dim regExMatch As Object
        Set regExMatch = regExMatches.Item(i)
                    
        Dim tokenName As String
        tokenName = Mid(regExMatch.Value, 2, Len(regExMatch.Value) - 2)
        
        outFileName = Left(outFileName, regExMatch.FirstIndex) & ResolveToken(tokenName, model) & Right(outFileName, Len(outFileName) - (regExMatch.FirstIndex + regExMatch.Length))
    Next
    
    ComposeOutFileName = ReplaceInvalidPathSymbols(GetFullPath(model, outFileName, outFolder))
    
End Function

Function ReplaceInvalidPathSymbols(path As String) As String
    
    Const REPLACE_SYMB As String = "_"
    
    Dim res As String
    res = Right(path, Len(path) - Len("X:\"))
    
    Dim drive As String
    drive = Left(path, Len("X:\"))
    
    Dim invalidSymbols As Variant
    invalidSymbols = Array("/", ":", "*", "?", """", "<", ">", "|")
    
    Dim i As Integer
    For i = 0 To UBound(invalidSymbols)
        Dim invalidSymb As String
        invalidSymb = CStr(invalidSymbols(i))
        res = Replace(res, invalidSymb, REPLACE_SYMB)
    Next
    
    ReplaceInvalidPathSymbols = drive + res
    
End Function

Function ResolveToken(token As String, model As SldWorks.ModelDoc2) As String
    
    Const FILE_NAME_TOKEN As String = "_FileName_"
    Const CONF_NAME_TOKEN As String = "_ConfName_"
    Const DISP_NAME_TOKEN As String = "_DispName_"
    
    Select Case LCase(token)
        Case LCase(DISP_NAME_TOKEN)
            ResolveToken = model.ConfigurationManager.ActiveConfiguration.GetDisplayStates()(0)
        Case LCase(FILE_NAME_TOKEN)
            ResolveToken = GetFileNameWithoutExtension(model.GetPathName)
        Case LCase(CONF_NAME_TOKEN)
            If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
                Dim swDraw As SldWorks.DrawingDoc
                Set swDraw = model
                ResolveToken = swDraw.GetCurrentSheet().GetName
            Else
                ResolveToken = model.ConfigurationManager.ActiveConfiguration.Name
            End If
        Case Else
            
            Dim swCustPrpMgr As SldWorks.CustomPropertyManager
            Dim resVal As String
            resVal = ""
            
            If model.GetType() <> swDocumentTypes_e.swDocDRAWING Then
                Set swCustPrpMgr = model.Extension.CustomPropertyManager(model.ConfigurationManager.ActiveConfiguration.Name)
                swCustPrpMgr.Get2 token, "", resVal
            End If
            
            If resVal = "" Then
                Set swCustPrpMgr = model.Extension.CustomPropertyManager("")
                swCustPrpMgr.Get2 token, "", resVal
            End If
            
            ResolveToken = resVal
    End Select
    
End Function

Function GetFileNameWithoutExtension(path As String) As String
    GetFileNameWithoutExtension = Mid(path, InStrRev(path, "\") + 1, InStrRev(path, ".") - InStrRev(path, "\") - 1)
End Function

Function GetExtension(path As String) As String
    GetExtension = Right(path, Len(path) - InStrRev(path, "."))
End Function

Function FileExists(filePath As String) As Boolean
    FileExists = Dir(filePath) <> ""
End Function

Sub CreateDirectories(path As String)

    Dim fso As Object
    Set fso = CreateObject("Scripting.FileSystemObject")

    If fso.FolderExists(path) Then
        Exit Sub
    End If

    CreateDirectories fso.GetParentFolderName(path)
    
    fso.CreateFolder path
    
End Sub

Function GetFullPath(model As SldWorks.ModelDoc2, path As String, outFolder As String)
    
    GetFullPath = path
        
    If IsPathRelative(path) Then
        
        If Left(path, 1) <> "\" Then
            path = "\" & path
        End If
        
        If outFolder = "" Then
        
            Dim modelPath As String
            Dim modelDir As String
            
            modelPath = model.GetPathName
            
            modelDir = Left(modelPath, InStrRev(modelPath, "\") - 1)
            
            outFolder = modelDir
        Else
            If Right(outFolder, 1) = "\" Then
                outFolder = Left(outFolder, Len(outFolder) - 1)
            End If
        End If
        
        GetFullPath = outFolder & path
        
    End If
    
End Function

Function IsPathRelative(path As String)
    IsPathRelative = Mid(path, 2, 1) <> ":" And Not IsPathUnc(path)
End Function

Function IsPathUnc(path As String)
    IsPathUnc = Left(path, 2) = "\\"
End Function

Function TryGetOutDirFromArguments(ByRef outDir As String) As Boolean

try_:

    On Error GoTo catch_

    Dim macroRunner As Object
    Set macroRunner = CreateObject("CadPlus.MacroRunner.Sw")
    
    Dim param As Object
    Set param = macroRunner.PopParameter(swApp)
    
    Dim vArgs As Variant
    vArgs = param.Get("Args")
    
    outDir = CStr(vArgs(0))
    TryGetOutDirFromArguments = True
    GoTo finally_
    
catch_:
    TryGetOutDirFromArguments = False
finally_:

End Function

[Bradfordzzz]

Thank you so much Stefan!

This works perfectly for the "Default Display State", but its stops before it does any of the others.
In fact .. it would be better for us if it only did the other display state, and it skipped the Default Display state, because that would just be our working display state, and not have any particular features isolated. Its ok if it gets made .. i just can't see us ever needing it so it would likely just be redundant.

Are you able to help with this?
Thanks,
Mark

[Stefan Sterk]

Well, these are the changes you need to make to make that happen. These are just quick edits, so keep in mind that the code can still be optimized. But it will do the job.

Simply change the following line with in Main()

Code: Select all

        ExportFile swModel, OUT_NAME_TEMPLATES, ALL_CONFIGS, outFolder

to

Code: Select all

    ' ####### LOOP THROUGH DISPLAY STATES #########
    Dim vDispStates As Variant
    vDispStates = swModel.ConfigurationManager.ActiveConfiguration.GetDisplayStates

    Dim i As Integer
    For i = 0 To UBound(vDispStates) ' <---- CHANGE i = 0 to i = 1 if you wanna skip the active display state
        swModel.ConfigurationManager.ActiveConfiguration.ApplyDisplayState vDispStates(i)
        ExportFile swModel, OUT_NAME_TEMPLATES, ALL_CONFIGS, outFolder
    Next
    swModel.ConfigurationManager.ActiveConfiguration.ApplyDisplayState vDispStates(0)

If you wanna skip the active displaystate then make the changes to the following line as described within the line.

Code: Select all

For i = 0 To UBound(vDispStates) ' <---- CHANGE i = 0 to i = 1 if you wanna skip the active display state

Here is the full code.

Code: Select all

'**********************
'Copyright(C) 2024 Xarial Pty Limited
'Reference: https://www.codestack.net/solidworks-api/import-export/export-multi-formats/
'License: https://www.codestack.net/license/
'**********************

Const ALL_CONFIGS As Boolean = False
Const OUT_FOLDER As String = ""
Const STEP_VERSION As Long = 214 '203 or 214
Const PDF_3D As Boolean = False 'True to export 3D PDF

Dim OUT_NAME_TEMPLATES As Variant

Dim swApp As SldWorks.SldWorks

Sub main()
        
    Dim origStepVersion As Long
        
    'OUT_NAME_TEMPLATES = Array("PDFs\<_FileName_>_<_ConfName_>_<PartNo>.pdf", "IMGs\<_FileName_>_<_ConfName_>_<PartNo>.jpg")
    OUT_NAME_TEMPLATES = Array("<_FileName_>_<_DispName_>.stp", "<_FileName_>_<_DispName_>.igs")
    
    Set swApp = Application.SldWorks
    
try_:
    On Error GoTo catch_
    
    Dim swModel As SldWorks.ModelDoc2
    Set swModel = swApp.ActiveDoc
    
    If swModel Is Nothing Then
        Err.Raise vbError, "", "Please open document"
    End If
    
    If swModel.GetPathName() = "" Then
        Err.Raise vbError, "", "Please save the model"
    End If
    
    Dim outFolder As String
    
    If Not TryGetOutDirFromArguments(outFolder) Then
        outFolder = OUT_FOLDER
    End If
    
    ReadOptions origStepVersion
    SetupOptions STEP_VERSION
    
    ' ####### LOOP THROUGH DISPLAY STATES #########
    Dim vDispStates As Variant
    vDispStates = swModel.ConfigurationManager.ActiveConfiguration.GetDisplayStates

    Dim i As Integer
    For i = 0 To UBound(vDispStates) ' <---- CHANGE i = 0 to i = 1 if you wanna skip the active display state
        swModel.ConfigurationManager.ActiveConfiguration.ApplyDisplayState vDispStates(i)
        ExportFile swModel, OUT_NAME_TEMPLATES, ALL_CONFIGS, outFolder
    Next
    swModel.ConfigurationManager.ActiveConfiguration.ApplyDisplayState vDispStates(0)
    
    GoTo finally_
    
catch_:
    swApp.SendMsgToUser2 Err.Description, swMessageBoxIcon_e.swMbStop, swMessageBoxBtn_e.swMbOk
finally_:

    SetupOptions origStepVersion

End Sub

Sub ReadOptions(ByRef stepVersion As Long)

    stepVersion = swApp.GetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP)
    
End Sub

Sub SetupOptions(stepVersion As Long)
    
    If False = swApp.SetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP, stepVersion) Then
        Err.Raise vbError, "", "Failed to set Step Export version to " & stepVersion
    End If
    
End Sub

Sub ExportFile(model As SldWorks.ModelDoc2, vOutNameTemplates As Variant, allConfigs As Boolean, outFolder As String)
    
    Dim i As Integer
    Dim j As Integer
    
    Dim curConf As String
    
    If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
        Dim swDraw As SldWorks.DrawingDoc
        Set swDraw = model
        curConf = swDraw.GetCurrentSheet().GetName
    Else
        curConf = model.ConfigurationManager.ActiveConfiguration.Name
    End If
    
    Dim vConfs As Variant
    
    If allConfigs Then
        If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
            vConfs = model.GetSheetNames()
        Else
            vConfs = model.GetConfigurationNames()
        End If
    Else
        Dim sConfs(0) As String
        sConfs(0) = curConf
        vConfs = sConfs
    End If
    
    For i = 0 To UBound(vConfs)
    
        If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
            curConf = swDraw.ActivateSheet(CStr(vConfs(i)))
        Else
            model.ShowConfiguration2 CStr(vConfs(i))
        End If
                
        For j = 0 To UBound(vOutNameTemplates)
            
            Dim errs As Long
            Dim warns As Long
        
            Dim outNameTemplate As String
            outNameTemplate = vOutNameTemplates(j)
            
            Dim outFilePath As String
            outFilePath = ComposeOutFileName(outNameTemplate, model, outFolder)

            Dim outDir As String
            outDir = Left(outFilePath, InStrRev(outFilePath, "\"))
    
            CreateDirectories outDir
            
            Dim swExportData As Object
            
            If LCase(GetExtension(outFilePath)) = LCase("pdf") Then
                Dim swExportPdfData As SldWorks.ExportPdfData
                Set swExportPdfData = swApp.GetExportFileData(swExportDataFileType_e.swExportPdfData)
                swExportPdfData.ViewPdfAfterSaving = False
                swExportPdfData.ExportAs3D = PDF_3D
                Set swExportData = swExportPdfData
            Else
                Set swExportData = Nothing
            End If
            
            If False = model.Extension.SaveAs(outFilePath, swSaveAsVersion_e.swSaveAsCurrentVersion, swSaveAsOptions_e.swSaveAsOptions_Silent + swSaveAsOptions_e.swSaveAsOptions_Copy, swExportData, errs, warns) Then
                Err.Raise vberrror, "", "Failed to export to " & outFilePath
            End If
            
        Next
        
    Next
    
    If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
        curConf = swDraw.ActivateSheet(curConf)
    Else
        model.ShowConfiguration2 curConf
    End If
    
End Sub

Function ComposeOutFileName(template As String, model As SldWorks.ModelDoc2, outFolder As String) As String

    Dim regEx As Object
    Set regEx = CreateObject("VBScript.RegExp")
    
    regEx.Global = True
    regEx.IgnoreCase = True
    regEx.Pattern = "<[^>]*>"
    
    Dim regExMatches As Object
    Set regExMatches = regEx.Execute(template)
    
    Dim i As Integer
    
    Dim outFileName As String
    outFileName = template
    
    For i = regExMatches.Count - 1 To 0 Step -1
        
        Dim regExMatch As Object
        Set regExMatch = regExMatches.Item(i)
                    
        Dim tokenName As String
        tokenName = Mid(regExMatch.Value, 2, Len(regExMatch.Value) - 2)
        
        outFileName = Left(outFileName, regExMatch.FirstIndex) & ResolveToken(tokenName, model) & Right(outFileName, Len(outFileName) - (regExMatch.FirstIndex + regExMatch.Length))
    Next
    
    ComposeOutFileName = ReplaceInvalidPathSymbols(GetFullPath(model, outFileName, outFolder))
    
End Function

Function ReplaceInvalidPathSymbols(path As String) As String
    
    Const REPLACE_SYMB As String = "_"
    
    Dim res As String
    res = Right(path, Len(path) - Len("X:\"))
    
    Dim drive As String
    drive = Left(path, Len("X:\"))
    
    Dim invalidSymbols As Variant
    invalidSymbols = Array("/", ":", "*", "?", """", "<", ">", "|")
    
    Dim i As Integer
    For i = 0 To UBound(invalidSymbols)
        Dim invalidSymb As String
        invalidSymb = CStr(invalidSymbols(i))
        res = Replace(res, invalidSymb, REPLACE_SYMB)
    Next
    
    ReplaceInvalidPathSymbols = drive + res
    
End Function

Function ResolveToken(token As String, model As SldWorks.ModelDoc2) As String
    
    Const FILE_NAME_TOKEN As String = "_FileName_"
    Const CONF_NAME_TOKEN As String = "_ConfName_"
    Const DISP_NAME_TOKEN As String = "_DispName_"
    
    Select Case LCase(token)
        Case LCase(DISP_NAME_TOKEN)
            ResolveToken = model.ConfigurationManager.ActiveConfiguration.GetDisplayStates()(0)
        Case LCase(FILE_NAME_TOKEN)
            ResolveToken = GetFileNameWithoutExtension(model.GetPathName)
        Case LCase(CONF_NAME_TOKEN)
            If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
                Dim swDraw As SldWorks.DrawingDoc
                Set swDraw = model
                ResolveToken = swDraw.GetCurrentSheet().GetName
            Else
                ResolveToken = model.ConfigurationManager.ActiveConfiguration.Name
            End If
        Case Else
            
            Dim swCustPrpMgr As SldWorks.CustomPropertyManager
            Dim resVal As String
            resVal = ""
            
            If model.GetType() <> swDocumentTypes_e.swDocDRAWING Then
                Set swCustPrpMgr = model.Extension.CustomPropertyManager(model.ConfigurationManager.ActiveConfiguration.Name)
                swCustPrpMgr.Get2 token, "", resVal
            End If
            
            If resVal = "" Then
                Set swCustPrpMgr = model.Extension.CustomPropertyManager("")
                swCustPrpMgr.Get2 token, "", resVal
            End If
            
            ResolveToken = resVal
    End Select
    
End Function

Function GetFileNameWithoutExtension(path As String) As String
    GetFileNameWithoutExtension = Mid(path, InStrRev(path, "\") + 1, InStrRev(path, ".") - InStrRev(path, "\") - 1)
End Function

Function GetExtension(path As String) As String
    GetExtension = Right(path, Len(path) - InStrRev(path, "."))
End Function

Function FileExists(filePath As String) As Boolean
    FileExists = Dir(filePath) <> ""
End Function

Sub CreateDirectories(path As String)

    Dim fso As Object
    Set fso = CreateObject("Scripting.FileSystemObject")

    If fso.FolderExists(path) Then
        Exit Sub
    End If

    CreateDirectories fso.GetParentFolderName(path)
    
    fso.CreateFolder path
    
End Sub

Function GetFullPath(model As SldWorks.ModelDoc2, path As String, outFolder As String)
    
    GetFullPath = path
        
    If IsPathRelative(path) Then
        
        If Left(path, 1) <> "\" Then
            path = "\" & path
        End If
        
        If outFolder = "" Then
        
            Dim modelPath As String
            Dim modelDir As String
            
            modelPath = model.GetPathName
            
            modelDir = Left(modelPath, InStrRev(modelPath, "\") - 1)
            
            outFolder = modelDir
        Else
            If Right(outFolder, 1) = "\" Then
                outFolder = Left(outFolder, Len(outFolder) - 1)
            End If
        End If
        
        GetFullPath = outFolder & path
        
    End If
    
End Function

Function IsPathRelative(path As String)
    IsPathRelative = Mid(path, 2, 1) <> ":" And Not IsPathUnc(path)
End Function

Function IsPathUnc(path As String)
    IsPathUnc = Left(path, 2) = "\\"
End Function

Function TryGetOutDirFromArguments(ByRef outDir As String) As Boolean

try_:

    On Error GoTo catch_

    Dim macroRunner As Object
    Set macroRunner = CreateObject("CadPlus.MacroRunner.Sw")
    
    Dim param As Object
    Set param = macroRunner.PopParameter(swApp)
    
    Dim vArgs As Variant
    vArgs = param.Get("Args")
    
    outDir = CStr(vArgs(0))
    TryGetOutDirFromArguments = True
    GoTo finally_
    
catch_:
    TryGetOutDirFromArguments = False
finally_:

End Function

[Bradfordzzz]

Thank you very much for this. It does exactly what I was looking for.
Really appreciate you taking the time for this.

Mark

[Bradfordzzz]

ok ... this might be a big ask ... im really not sure. feel free to tell me to bugger off if it is.

Im just wondering if you might be able to modify this macro so that a selection box would pop up and allow you to select which display states you would want the macro to process? Is that doable?

[Stefan Sterk]

ok ... this might be a big ask ... im really not sure. feel free to tell me to bugger off if it is.

Im just wondering if you might be able to modify this macro so that a selection box would pop up and allow you to select which display states you would want the macro to process? Is that doable?

Yes that is possible.

1. Create a UserForm1
2. Add ListBox1 to UserFrom1
3. Add CommandButton1 to UserForm1

4. Copy and paste the following code under UserForm1.
UserFrom1

Code: Select all

Option Explicit

Private Sub CommandButton1_Click()
    Me.Hide
End Sub

Private Sub UserForm_Initialize()
    
    Me.Caption = "Display State - Batch Exporter"
    Me.Height = 247
    Me.Width = 200
     
    ListBox1.Top = 5
    ListBox1.Left = 5
    ListBox1.Width = 178
    ListBox1.Height = 180
    ListBox1.MultiSelect = fmMultiSelectExtended
    
    CommandButton1.Top = 188
    CommandButton1.Left = 5
    CommandButton1.Caption = "Start Export"
   
End Sub

Private Sub UserForm_Terminate()
    ListBox1.Clear
End Sub

And this code to your main module
Module...

Code: Select all

'**********************
'Copyright(C) 2024 Xarial Pty Limited
'Reference: https://www.codestack.net/solidworks-api/import-export/export-multi-formats/
'License: https://www.codestack.net/license/
'**********************

Const ALL_CONFIGS As Boolean = False
Const OUT_FOLDER As String = ""
Const STEP_VERSION As Long = 214 '203 or 214
Const PDF_3D As Boolean = False 'True to export 3D PDF

Dim OUT_NAME_TEMPLATES As Variant

Dim swApp As SldWorks.SldWorks

Sub main()
        
    Dim origStepVersion As Long
        
    'OUT_NAME_TEMPLATES = Array("PDFs\<_FileName_>_<_ConfName_>_<PartNo>.pdf", "IMGs\<_FileName_>_<_ConfName_>_<PartNo>.jpg")
    OUT_NAME_TEMPLATES = Array("<_FileName_>_<_DispName_>.stp", "<_FileName_>_<_DispName_>.igs")
    
    Set swApp = Application.SldWorks
    
try_:
    On Error GoTo catch_
    
    Dim swModel As SldWorks.ModelDoc2
    Set swModel = swApp.ActiveDoc
    
    If swModel Is Nothing Then
        Err.Raise vbError, "", "Please open document"
    End If
    
    If swModel.GetPathName() = "" Then
        Err.Raise vbError, "", "Please save the model"
    End If
    
    Dim outFolder As String
    
    If Not TryGetOutDirFromArguments(outFolder) Then
        outFolder = OUT_FOLDER
    End If
    
    ReadOptions origStepVersion
    SetupOptions STEP_VERSION
    
    ' ####### LOOP THROUGH DISPLAY STATES #########
    Dim vDispStates As Variant
    vDispStates = swModel.ConfigurationManager.ActiveConfiguration.GetDisplayStates
    
    Dim vDispState As Variant
    For Each vDispState In vDispStates
        UserForm1.ListBox1.AddItem vDispState
    Next vDispState
    UserForm1.Show
  
    Dim i As Integer
    For i = 0 To UserForm1.ListBox1.ListCount - 1
        If UserForm1.ListBox1.Selected(i) = True Then
            Debug.Print UserForm1.ListBox1.List(i)
            swModel.ConfigurationManager.ActiveConfiguration.ApplyDisplayState UserForm1.ListBox1.List(i)
            ExportFile swModel, OUT_NAME_TEMPLATES, ALL_CONFIGS, outFolder
        End If
    Next i
    swModel.ConfigurationManager.ActiveConfiguration.ApplyDisplayState vDispStates(0)
    
    GoTo finally_
    
catch_:
    swApp.SendMsgToUser2 Err.Description, swMessageBoxIcon_e.swMbStop, swMessageBoxBtn_e.swMbOk
finally_:

    SetupOptions origStepVersion
    Unload UserForm1
    
End Sub

Sub ReadOptions(ByRef stepVersion As Long)

    stepVersion = swApp.GetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP)
    
End Sub

Sub SetupOptions(stepVersion As Long)
    
    If False = swApp.SetUserPreferenceIntegerValue(swUserPreferenceIntegerValue_e.swStepAP, stepVersion) Then
        Err.Raise vbError, "", "Failed to set Step Export version to " & stepVersion
    End If
    
End Sub

Sub ExportFile(model As SldWorks.ModelDoc2, vOutNameTemplates As Variant, allConfigs As Boolean, outFolder As String)
    
    Dim i As Integer
    Dim j As Integer
    
    Dim curConf As String
    
    If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
        Dim swDraw As SldWorks.DrawingDoc
        Set swDraw = model
        curConf = swDraw.GetCurrentSheet().GetName
    Else
        curConf = model.ConfigurationManager.ActiveConfiguration.Name
    End If
    
    Dim vConfs As Variant
    
    If allConfigs Then
        If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
            vConfs = model.GetSheetNames()
        Else
            vConfs = model.GetConfigurationNames()
        End If
    Else
        Dim sConfs(0) As String
        sConfs(0) = curConf
        vConfs = sConfs
    End If
    
    For i = 0 To UBound(vConfs)
    
        If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
            curConf = swDraw.ActivateSheet(CStr(vConfs(i)))
        Else
            model.ShowConfiguration2 CStr(vConfs(i))
        End If
                
        For j = 0 To UBound(vOutNameTemplates)
            
            Dim errs As Long
            Dim warns As Long
        
            Dim outNameTemplate As String
            outNameTemplate = vOutNameTemplates(j)
            
            Dim outFilePath As String
            outFilePath = ComposeOutFileName(outNameTemplate, model, outFolder)

            Dim outDir As String
            outDir = Left(outFilePath, InStrRev(outFilePath, "\"))
    
            CreateDirectories outDir
            
            Dim swExportData As Object
            
            If LCase(GetExtension(outFilePath)) = LCase("pdf") Then
                Dim swExportPdfData As SldWorks.ExportPdfData
                Set swExportPdfData = swApp.GetExportFileData(swExportDataFileType_e.swExportPdfData)
                swExportPdfData.ViewPdfAfterSaving = False
                swExportPdfData.ExportAs3D = PDF_3D
                Set swExportData = swExportPdfData
            Else
                Set swExportData = Nothing
            End If
            
            If False = model.Extension.SaveAs(outFilePath, swSaveAsVersion_e.swSaveAsCurrentVersion, swSaveAsOptions_e.swSaveAsOptions_Silent + swSaveAsOptions_e.swSaveAsOptions_Copy, swExportData, errs, warns) Then
                Err.Raise vberrror, "", "Failed to export to " & outFilePath
            End If
            
        Next
        
    Next
    
    If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
        curConf = swDraw.ActivateSheet(curConf)
    Else
        model.ShowConfiguration2 curConf
    End If
    
End Sub

Function ComposeOutFileName(template As String, model As SldWorks.ModelDoc2, outFolder As String) As String

    Dim regEx As Object
    Set regEx = CreateObject("VBScript.RegExp")
    
    regEx.Global = True
    regEx.IgnoreCase = True
    regEx.Pattern = "<[^>]*>"
    
    Dim regExMatches As Object
    Set regExMatches = regEx.Execute(template)
    
    Dim i As Integer
    
    Dim outFileName As String
    outFileName = template
    
    For i = regExMatches.Count - 1 To 0 Step -1
        
        Dim regExMatch As Object
        Set regExMatch = regExMatches.Item(i)
                    
        Dim tokenName As String
        tokenName = Mid(regExMatch.Value, 2, Len(regExMatch.Value) - 2)
        
        outFileName = Left(outFileName, regExMatch.FirstIndex) & ResolveToken(tokenName, model) & Right(outFileName, Len(outFileName) - (regExMatch.FirstIndex + regExMatch.Length))
    Next
    
    ComposeOutFileName = ReplaceInvalidPathSymbols(GetFullPath(model, outFileName, outFolder))
    
End Function

Function ReplaceInvalidPathSymbols(path As String) As String
    
    Const REPLACE_SYMB As String = "_"
    
    Dim res As String
    res = Right(path, Len(path) - Len("X:\"))
    
    Dim drive As String
    drive = Left(path, Len("X:\"))
    
    Dim invalidSymbols As Variant
    invalidSymbols = Array("/", ":", "*", "?", """", "<", ">", "|")
    
    Dim i As Integer
    For i = 0 To UBound(invalidSymbols)
        Dim invalidSymb As String
        invalidSymb = CStr(invalidSymbols(i))
        res = Replace(res, invalidSymb, REPLACE_SYMB)
    Next
    
    ReplaceInvalidPathSymbols = drive + res
    
End Function

Function ResolveToken(token As String, model As SldWorks.ModelDoc2) As String
    
    Const FILE_NAME_TOKEN As String = "_FileName_"
    Const CONF_NAME_TOKEN As String = "_ConfName_"
    Const DISP_NAME_TOKEN As String = "_DispName_"
    
    Select Case LCase(token)
        Case LCase(DISP_NAME_TOKEN)
            ResolveToken = model.ConfigurationManager.ActiveConfiguration.GetDisplayStates()(0)
        Case LCase(FILE_NAME_TOKEN)
            ResolveToken = GetFileNameWithoutExtension(model.GetPathName)
        Case LCase(CONF_NAME_TOKEN)
            If model.GetType() = swDocumentTypes_e.swDocDRAWING Then
                Dim swDraw As SldWorks.DrawingDoc
                Set swDraw = model
                ResolveToken = swDraw.GetCurrentSheet().GetName
            Else
                ResolveToken = model.ConfigurationManager.ActiveConfiguration.Name
            End If
        Case Else
            
            Dim swCustPrpMgr As SldWorks.CustomPropertyManager
            Dim resVal As String
            resVal = ""
            
            If model.GetType() <> swDocumentTypes_e.swDocDRAWING Then
                Set swCustPrpMgr = model.Extension.CustomPropertyManager(model.ConfigurationManager.ActiveConfiguration.Name)
                swCustPrpMgr.Get2 token, "", resVal
            End If
            
            If resVal = "" Then
                Set swCustPrpMgr = model.Extension.CustomPropertyManager("")
                swCustPrpMgr.Get2 token, "", resVal
            End If
            
            ResolveToken = resVal
    End Select
    
End Function

Function GetFileNameWithoutExtension(path As String) As String
    GetFileNameWithoutExtension = Mid(path, InStrRev(path, "\") + 1, InStrRev(path, ".") - InStrRev(path, "\") - 1)
End Function

Function GetExtension(path As String) As String
    GetExtension = Right(path, Len(path) - InStrRev(path, "."))
End Function

Function FileExists(filePath As String) As Boolean
    FileExists = Dir(filePath) <> ""
End Function

Sub CreateDirectories(path As String)

    Dim fso As Object
    Set fso = CreateObject("Scripting.FileSystemObject")

    If fso.FolderExists(path) Then
        Exit Sub
    End If

    CreateDirectories fso.GetParentFolderName(path)
    
    fso.CreateFolder path
    
End Sub

Function GetFullPath(model As SldWorks.ModelDoc2, path As String, outFolder As String)
    
    GetFullPath = path
        
    If IsPathRelative(path) Then
        
        If Left(path, 1) <> "\" Then
            path = "\" & path
        End If
        
        If outFolder = "" Then
        
            Dim modelPath As String
            Dim modelDir As String
            
            modelPath = model.GetPathName
            
            modelDir = Left(modelPath, InStrRev(modelPath, "\") - 1)
            
            outFolder = modelDir
        Else
            If Right(outFolder, 1) = "\" Then
                outFolder = Left(outFolder, Len(outFolder) - 1)
            End If
        End If
        
        GetFullPath = outFolder & path
        
    End If
    
End Function

Function IsPathRelative(path As String)
    IsPathRelative = Mid(path, 2, 1) <> ":" And Not IsPathUnc(path)
End Function

Function IsPathUnc(path As String)
    IsPathUnc = Left(path, 2) = "\\"
End Function

Function TryGetOutDirFromArguments(ByRef outDir As String) As Boolean

try_:

    On Error GoTo catch_

    Dim macroRunner As Object
    Set macroRunner = CreateObject("CadPlus.MacroRunner.Sw")
    
    Dim param As Object
    Set param = macroRunner.PopParameter(swApp)
    
    Dim vArgs As Variant
    vArgs = param.Get("Args")
    
    outDir = CStr(vArgs(0))
    TryGetOutDirFromArguments = True
    GoTo finally_
    
catch_:
    TryGetOutDirFromArguments = False
finally_:

End Function

Which should result in ⇩

image.png (7.25 KiB) Viewed 678 times

[Bradfordzzz]

I have tried running the new macro, but when importing the userform, I get the following error.

UserForm1.log
Line 8: Property OleObjectBlob in UserForm1 had an invalid file reference.

[Stefan Sterk]

I have tried running the new macro, but when importing the userform, I get the following error.

image.png

UserForm1.log
Line 8: Property OleObjectBlob in UserForm1 had an invalid file reference.

I see. Got the same error when importing. Not sure why it's doing that. I have edited the post, you need to manualy add the UserForum.

[Bradfordzzz]

I see. Got the same error when importing. Not sure why it's doing that. I have edited the post, you need to manualy add the UserForum.

Your new macro works perfectly! Thanks so much Stefan. Really appreciated!!