Banner Image Voting

matt · Unread post by **matt** » Mon Apr 26, 2021 10:53 am

Ok, we've got a few submissions in. This will run for this whole week, results announced a week from today! May add some late entries, you are allowed to change your vote. Pick only 1.

: image.png (140.4 KiB) Viewed 8781 times

: image.png (29 KiB) Viewed 8781 times

: image.png (109.61 KiB) Viewed 8781 times

: image.png (99.77 KiB) Viewed 8781 times

: image.png (80.87 KiB) Viewed 8781 times

mike miller · Unread post by **mike miller** » Mon Apr 26, 2021 11:17 am

@matt, I wasn't really serious about my entry.

On the other hand, that might be the most accurate.......

matt · Unread post by **matt** » Mon Apr 26, 2021 11:29 am

mike miller wrote: ↑Mon Apr 26, 2021 11:17 am @matt, I wasn't really serious about my entry.

On the other hand, that might be the most accurate.......

Yeah, I kinda knew that, but I liked the "brick in the wall" reference.

mattpeneguy · Unread post by **mattpeneguy** » Mon Apr 26, 2021 11:50 am

A late submission, but feel free to incorporate it into the the banner...

zwei · Unread post by **zwei** » Mon Apr 26, 2021 8:10 pm

Maybe you want to create an announcement for this so that people are aware of this?

DennisD · Unread post by **DennisD** » Tue Apr 27, 2021 8:01 am

mattpeneguy wrote: ↑Mon Apr 26, 2021 11:50 am A late submission, but feel free to incorporate it into the the banner...
image.png

This should be titled Smashing CAD Barriers!

Krzysztof Szpakowski · Tue Apr 27, 2021 10:08 pm

Hmm... Maybe....

AlexLachance · Unread post by **AlexLachance** » Wed Apr 28, 2021 7:48 am

Krzysztof Szpakowski wrote: ↑Tue Apr 27, 2021 10:08 pm Hmm... Maybe....

image.png

That's a really cool logo Krysztof, and the slogan is also really good!

Krzysztof Szpakowski · Wed Apr 28, 2021 7:58 am

Thanks Alex.
I don't remember if I wrote in the old forum that I used to have a small advertising agency. At that time, I got infected with 3D. It ended with my marriage (not 3D - company).
As for the slogan. I think most of us here are above programmers. Primo: We find ways to do something that is impossible for them. Secundo: The customer should be at the top. DSS forgets about it.

matt · Unread post by **matt** » Wed Apr 28, 2021 10:10 am

Krzysztof Szpakowski wrote: ↑Wed Apr 28, 2021 7:58 am Thanks Alex.
I don't remember if I wrote in the old forum that I used to have a small advertising agency. At that time, I got infected with 3D. It ended with my marriage (not 3D - company).
As for the slogan. I think most of us here are above programmers. Primo: We find ways to do something that is impossible for them. Secundo: The customer should be at the top. DSS forgets about it.

Ok, I updated the voting to include @Krzysztof Szpakowski entry. Remember, you can change your vote, and you've got until Monday.

**AAARRRGGGGHHHH**** Adding the poll reset all the vote tallies.

Krzysztof Szpakowski · Wed Apr 28, 2021 10:41 am

matt wrote: ↑Wed Apr 28, 2021 10:10 am Ok, I updated the voting to include @Krzysztof Szpakowski entry. Remember, you can change your vote, and you've got until Monday.

**AAARRRGGGGHHHH**** Adding the poll reset all the vote tallies.

Sorry, that wasn't my intention

matt · Unread post by **matt** » Wed Apr 28, 2021 10:53 am

Krzysztof Szpakowski wrote: ↑Wed Apr 28, 2021 10:41 am Sorry, that wasn't my intention

No, it was my fault, not yours.

HerrTick · Unread post by **HerrTick** » Wed Apr 28, 2021 2:15 pm

https://www.navytimes.com/news/your-nav ... sky%20dong.

Was this the inspiration for entry #6?

SPerman · Unread post by **SPerman** » Wed Apr 28, 2021 2:17 pm

matt wrote: ↑Wed Apr 28, 2021 10:10 am **AAARRRGGGGHHHH**** Adding the poll reset all the vote tallies.

This place is a train wreck. I'm going back to that other place where they have their $#!+ together.

Roasted By John · Wed Apr 28, 2021 2:26 pm

I know it's lame, but here we is

DennisD · Unread post by **DennisD** » Wed Apr 28, 2021 3:15 pm

HerrTick wrote: ↑Wed Apr 28, 2021 2:15 pm https://www.navytimes.com/news/your-nav ... sky%20dong.

Was this the inspiration for entry #6?

image.png (123.87 KiB) Viewed 8522 times

If we make this our logo we might be able to get sponsorship from the makers of the little blue pill!

Putting the SOLID in solid modeling!

mattpeneguy · Unread post by **mattpeneguy** » Wed Apr 28, 2021 3:27 pm

Krzysztof Szpakowski · Wed Apr 28, 2021 3:35 pm

HerrTick wrote: ↑Wed Apr 28, 2021 2:15 pm https://www.navytimes.com/news/your-nav ... sky%20dong.

Was this the inspiration for entry #6?
image.png

: image.png (79.61 KiB) Viewed 8515 times

Considering the proportions, it's either a scrotal hernia or... I sympathize even more...

HerrTick · Unread post by **HerrTick** » Thu Apr 29, 2021 8:12 am

Just a concept. CadForum would be welcome to punch it up. Texture, colors, flying shards...

DennisD · Unread post by **DennisD** » Thu Apr 29, 2021 8:31 am

mattpeneguy wrote: ↑Wed Apr 28, 2021 3:27 pm

image.png (256.86 KiB) Viewed 8450 times

Possible captions for this picture:
WTF?!
Are you kidding me?!
Is this the cover for the YMCA album remake?
Oh that's just great! Another thing to get my kid to program for me!
What is i to the i power? We didn't cover that in the math I took.
Is this the new Stargate portal?

mattpeneguy · Unread post by **mattpeneguy** » Thu Apr 29, 2021 9:14 am

DennisD wrote: ↑Thu Apr 29, 2021 8:31 am Possible captions for this picture:
WTF?!
Are you kidding me?!
Is this the cover for the YMCA album remake?
Oh that's just great! Another thing to get my kid to program for me!
What is i to the i power? We didn't cover that in the math I took.
Is this the new Stargate portal?

I don't think James Spader could decipher those hieroglyphs...Maybe we should ask him...

mattpeneguy · Unread post by **mattpeneguy** » Thu Apr 29, 2021 9:25 am

mattpeneguy wrote: ↑Thu Apr 29, 2021 9:14 am I don't think James Spader could decipher those hieroglyphs...Maybe we should ask him...

Anyone interested can go answer this question:

matt · Unread post by **matt** » Mon May 03, 2021 10:36 am

Thanks to everyone for submitting images and for voting. @Zhen-Wei Tee is the winner! Congrats, @Zhen-Wei Tee

Next, I'll incorporate the image into the installed themes.

Thanks again!

Jaylin Hochstetler · Mon May 03, 2021 12:01 pm

Congratulation @Zhen-Wei Tee!

SPerman · Unread post by **SPerman** » Tue May 04, 2021 7:23 am

Something is wrong with the header layout (chrome.)

Ömür Tokman · Tue May 04, 2021 7:35 am

Me too
chrome

mozilla

Frank_Oostendorp · Tue May 04, 2021 7:38 am

viewtopic.php?p=5520#p5520
Some few more

majo · Unread post by **majo** » Tue May 04, 2021 7:41 am

To change the board style may help.
Under "User Control Panel"

matt · Unread post by **matt** » Tue May 04, 2021 9:33 am

Yeah, some of the themes don't work well with the new header. Purplexion, Prosilver, Supernova, Carbon, Flat, Chester Blue, clean silver

Quantum Codex seems to ignore the new header.

Recommended themes are Elegance, Breeze, Prolight is ok. The best in my opinion is Elegance, followed by Flat. I like Breeze, but it doesn't show titles for post responses, just for the original post. So if the title changes somewhere along the way, you will miss that.

We may have to trim out some of these themes.

What has happened is that I've used an extension to change the header, which works across multiple themes. If I hadn't done that, I would need to go into each theme's files and edit the php code, which would be a lot more work.

bnemec · Unread post by **bnemec** » Tue May 04, 2021 10:16 am

For what it's worth, I'm using Flat Style Gold:
- the links: Board Index, Board Business, etc. are dead, just plain text.
- Looks nice though
- new google search tool (part of the banner) is dead
- the link: https://cadforum.net/index.php in the image does work.

SPerman · Unread post by **SPerman** » Tue May 04, 2021 10:34 am

I wish the themes just changed colors, not the entire layout.

matt · Unread post by **matt** » Tue May 04, 2021 10:39 am

SPerman wrote: ↑Tue May 04, 2021 10:34 am I wish the themes just changed colors, not the entire layout.

Within the Elegance theme, there are several color schemes. Flat also has blue and gold options.

HerrTick · Unread post by **HerrTick** » Tue May 04, 2021 10:46 am

Banner is all askew and covers vital control points.

jcapriotti · Unread post by **jcapriotti** » Tue May 04, 2021 11:00 am

@matt Do we get to draw on that chalkboard on the right of the image? Just to add our own personal touch to the forum.

matt · Unread post by **matt** » Tue May 04, 2021 11:02 am

HerrTick wrote: ↑Tue May 04, 2021 10:46 am image.png

Banner is all askew and covers vital control points.

From an earlier post. Maybe I need a bigger font.

Recommended themes are Elegance, Breeze, Prolight

matt · Unread post by **matt** » Tue May 04, 2021 11:06 am

jcapriotti wrote: ↑Tue May 04, 2021 11:00 am @matt Do we get to draw on that chalkboard on the right of the image? Just to add our own personal touch to the forum.

It's not really a chalkboard, but yeah, that was kind of the general idea. For Christmas, put up some Christmas images, for special events, change the header image. Somebody gets married, we can change it to black.

It's really a swatch of scratched up steel, which I thought might make designers feel at home, and it's kind of generic color which might not clash with some themes.

VicFrauenfeld · Tue May 04, 2021 11:11 am

@matt, what about a brick wall? We can use it to smash our heads against (because the software is not functioning correctly, not because of this forum).

Wait! That might damage computer monitors, better not do that!

Thanks for all you do on this site. It is greatly appreciated.

jcapriotti · Unread post by **jcapriotti** » Tue May 04, 2021 11:44 am

@matt Darn it, I thought it might be an interactive onscreen chalkboard where we could draw inappropriate drawings for everyone to enjoy.

HerrTick · Unread post by **HerrTick** » Tue May 04, 2021 12:03 pm

{repeating with mocking sneer}Recommended themes are Elegance, Breeze, Prolight

If users need to change settings to accommodate the layout. The site is BROKEN.

BROKEN.

[indent][indent][indent] BROKEN [/indent][/indent][/indent].
[indent]BROKEN[/indent].

also your indent is broken

mattpeneguy · Unread post by **mattpeneguy** » Tue May 04, 2021 1:03 pm

So we can put what we want in the space available:

matt · Unread post by **matt** » Tue May 04, 2021 4:46 pm

HerrTick wrote: ↑Tue May 04, 2021 12:03 pm ...

also your indent is broken

I showed everyone else how to use the Indent functionality before, but I can run through it again for you.

For example,

Code: Select all

[indent]12[/indent] Text that you want indented 12 pixels

gives you
Text that you want indented 12 pixels

This information also shows up in the tool tip for the indent function.

It isn't microsoft or word perfect. The number is the number of pixels you want to indent the text after the closing /indent. It's not perfect, it's not ergonomic, it's phpbb. Slightly more user friendly than html and an additional acronym you can put on your resume

Fun, huh?

jcapriotti · Unread post by **jcapriotti** » Tue May 04, 2021 6:45 pm

Everyone, don't forget to buy your pixel ruler for proper indents.

mattpeneguy · Unread post by **mattpeneguy** » Tue May 04, 2021 6:48 pm

jcapriotti wrote: ↑Tue May 04, 2021 6:45 pm Everyone, don't forget to buy your pixel ruler for proper indents.

image.png

That's a dated pixel ruler...doesn't even go up to 4k...sheesh...

jcapriotti · Unread post by **jcapriotti** » Wed May 05, 2021 12:30 pm

mattpeneguy wrote: ↑Tue May 04, 2021 6:48 pm That's a dated pixel ruler...doesn't even go up to 4k...sheesh...

Forget 4k, it's time for 8k. SolidWorks on a 150" 8k monitor....

mattpeneguy · Unread post by **mattpeneguy** » Wed May 05, 2021 6:05 pm

jcapriotti wrote: ↑Wed May 05, 2021 12:30 pm Forget 4k, it's time for 8k. SolidWorks on a 150" 8k monitor....

Just so long as you aren't more than 18" away from the screen...any further than that and you'll need a 16k monitor...

Which image would you like to see used as a logo in the forum's header?