Watercooler Talk

For things you would put in a kitty dump.
User avatar
Glenn Schroeder
Posts: 1522
Joined: Mon Mar 08, 2021 11:43 am
Answers: 23
Location: southeast Texas
x 1759
x 2132

Re: Watercooler Talk

Unread post by Glenn Schroeder »

Ömür Tokman wrote: Thu May 06, 2021 8:53 am irrelevant to matters, but I'm curious.
I always keep a sponge under my elbow. otherwise my arm always goes numb.
How do you guys work?
2.jpg
I work with my keyboard and mouse pad near the edge of the desk, so the heel of my hand is all that's on it. My upper arm is very near vertical, so there's no noticeable strain in my elbow. There's 6" - 8" between me and the front of the desk.
"On the days when I keep my gratitude higher than my expectations, well, I have really good days."

Ray Wylie Hubbard in his song "Mother Blues"
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

Roasted By John wrote: Wed May 05, 2021 6:25 am Now that's Foul ;)

You could try our Turpiggy :shock:

image.png
image.png (228.03 KiB) Viewed 10704 times
If you are going to do that, why not a Turducken?
Chicken inside a duck which is inside a turkey...
There's even a meme, I never knew about:

image.png
User avatar
DennisD
Posts: 707
Joined: Fri Mar 12, 2021 10:04 am
Answers: 1
Location: Near Jacksonville, FL
x 1031
x 1468

Re: Watercooler Talk

Unread post by DennisD »

mattpeneguy wrote: Thu May 06, 2021 1:31 pm If you are going to do that, why not a Turducken?
Chicken inside a duck which is inside a turkey...
There's even a meme, I never knew about:


image.png
@mattpeneguy, there is something wrong with you. . . AND I LIKE IT!!
Brick walls are there for a reason. The brick walls aren't there to keep us out. The brick walls are there to show us how badly we want things.
- - -Randy Pausch
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

DennisD wrote: Thu May 06, 2021 2:00 pm @mattpeneguy, there is something wrong with you. . . AND I LIKE IT!!
Turducken was big down here 20 or 30 years ago. I'm not sure it started down here, but I think it did. The birds are all deboned, so you slice it like a roast. The duck fat gets into both the chicken and the turkey. So it's real juicy. If you've never had it, I recommend it. I'm pretty sure you can get them in most parts of the country now, just like Tobasco (when I was 6 and lived in TX, it was a big deal that we got some Tabasco...Now you can get a bottle at a gas station in Newark)...if you do get a turducken, don't take my advice as you should get one from a gas station....
MJuric
Posts: 1070
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
x 31
x 874

Re: Watercooler Talk

Unread post by MJuric »

mattpeneguy wrote: Thu May 06, 2021 2:19 pm Turducken was big down here 20 or 30 years ago. I'm not sure it started down here, but I think it did. The birds are all deboned, so you slice it like a roast. The duck fat gets into both the chicken and the turkey. So it's real juicy. If you've never had it, I recommend it. I'm pretty sure you can get them in most parts of the country now, just like Tobasco (when I was 6 and lived in TX, it was a big deal that we got some Tabasco...Now you can get a bottle at a gas station in Newark)...if you do get a turducken, don't take my advice as you should get one from a gas station....
We had a Turducken for a couple Thanksgiving dinners. The ones we had also had some sort of sausage mixture between each layer. Not sure if that is "Normal" or just the ones we had.

Been a while but if I recall it being like a "Meat Roll". Cut it like a roast and you got Turkey, sausage, duck, sausage, chicken, sausage. I remember it being very tasty partially because the sausage mixture had just a tiny bit of spice with it.
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

MJuric wrote: Thu May 06, 2021 2:27 pm We had a Turducken for a couple Thanksgiving dinners. The ones we had also had some sort of sausage mixture between each layer. Not sure if that is "Normal" or just the ones we had.

Been a while but if I recall it being like a "Meat Roll". Cut it like a roast and you got Turkey, sausage, duck, sausage, chicken, sausage. I remember it being very tasty partially because the sausage mixture had just a tiny bit of spice with it.
Pfft...Spoken like a true Yankee...
Remember we are the people that couldn't get enough spices on the outside of the meat...So we came up with this:
image.png
image.png (85.95 KiB) Viewed 10687 times
Ya know we've got our own Navy now, too?
MJuric
Posts: 1070
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
x 31
x 874

Re: Watercooler Talk

Unread post by MJuric »

mattpeneguy wrote: Thu May 06, 2021 3:04 pm Pfft...Spoken like a true Yankee...
Remember we are the people that couldn't get enough spices on the outside of the meat...So we came up with this:
image.png
I actually have one of those that I use on turkeys. My favorite so far is a Jalapeno sauce I make myself. Oddly enough it's not hot and gives the Turkey an oddly "Earthy" herbal flavor. I used to do this all the time when I would deep fry a turkey....which I don't do much anymore because it's a mess.
mattpeneguy wrote: Thu May 06, 2021 3:04 pm Ya know we've got our own Navy now, too?
I think I remember a time in American history when the south tried that once before
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

MJuric wrote: Thu May 06, 2021 3:13 pm I actually have one of those that I use on turkeys. My favorite so far is a Jalapeno sauce I make myself. Oddly enough it's not hot and gives the Turkey an oddly "Earthy" herbal flavor. I used to do this all the time when I would deep fry a turkey....which I don't do much anymore because it's a mess.
Just about as good (I can't tell the difference) and nowhere near the mess:
https://www.charbroil.com/the-big-easy- ... r-17102065
All I do with the turkey is take some season salt (Slap ya Momma, (not Tony Cachere's) or one of the local ones we have in our area that has a good seasoning to salt ratio) and separate the skin from the turkey and run my hand with small handfuls of the season salt on the meat. I get a decent coating on the meat. Then I salt the outside of the skin. It takes about 2 1/2 hours to cook, but there's no oil to deal with.
I think I remember a time in American history when the south tried that once before
I'd never have guessed you were that old...
MJuric
Posts: 1070
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
x 31
x 874

Re: Watercooler Talk

Unread post by MJuric »

mattpeneguy wrote: Thu May 06, 2021 3:29 pm Just about as good (I can't tell the difference) and nowhere near the mess:
https://www.charbroil.com/the-big-easy- ... r-17102065
All I do with the turkey is take some season salt (Slap ya Momma, (not Tony Cachere's) or one of the local ones we have in our area that has a good seasoning to salt ratio) and separate the skin from the turkey and run my hand with small handfuls of the season salt on the meat. I get a decent coating on the meat. Then I salt the outside of the skin. It takes about 2 1/2 hours to cook, but there's no oil to deal with.
Hmmm...that might have to go on the Amazon wish list.
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

MJuric wrote: Thu May 06, 2021 3:33 pm Hmmm...that might have to go on the Amazon wish list.
Check the price. It's sometimes significantly more expensive on Amazon than directly from Charbroil.
User avatar
zwei
Posts: 701
Joined: Mon Mar 15, 2021 9:17 pm
Answers: 18
Location: Malaysia
x 185
x 600

Re: Watercooler Talk

Unread post by zwei »

So i take a peek at SOLIDWORK blog today and they had a so call CLOUD QUIZ which i thought i can try it out
https://blogs.solidworks.com/solidworksblog/
image.png
I tried it and this is what it give me...which is pretty useless
The question also dint make sense by the way.
image.png
Make me wonder what DS do with their resource eh?
Far too many items in the world are designed, constructed and foisted upon us with no understanding-or even care-for how we will use them.
User avatar
zxys001
Posts: 1077
Joined: Fri Apr 02, 2021 10:08 am
Answers: 5
Location: Scotts Valley, Ca.
x 2305
x 998
Contact:

Re: Watercooler Talk

Unread post by zxys001 »

Zhen-Wei Tee wrote: Fri May 07, 2021 11:16 am So i take a peek at SOLIDWORK blog today and they had a so call CLOUD QUIZ which i thought i can try it out
https://blogs.solidworks.com/solidworksblog/

image.png

I tried it and this is what it give me...which is pretty useless
The question also dint make sense by the way.
image.png

Make me wonder what DS do with their resource eh?
..I think I read/saw that wrong? :D
Attachments
4014117_color-5bb5325746e0fb0026d849e4.png
"Democracies aren't overthrown; they're given away." -George Lucas
“We only protect what we love, we only love what we understand, and we only understand what we are taught.” - Jacques Cousteau
User avatar
zxys001
Posts: 1077
Joined: Fri Apr 02, 2021 10:08 am
Answers: 5
Location: Scotts Valley, Ca.
x 2305
x 998
Contact:

Re: Watercooler Talk

Unread post by zxys001 »

mattpeneguy wrote: Thu May 06, 2021 3:29 pm Just about as good (I can't tell the difference) and nowhere near the mess:
https://www.charbroil.com/the-big-easy- ... r-17102065
All I do with the turkey is take some season salt (Slap ya Momma, (not Tony Cachere's) or one of the local ones we have in our area that has a good seasoning to salt ratio) and separate the skin from the turkey and run my hand with small handfuls of the season salt on the meat. I get a decent coating on the meat. Then I salt the outside of the skin. It takes about 2 1/2 hours to cook, but there's no oil to deal with.


I'd never have guessed you were that old...
The Big Easy is great!... I have the one with the hood.
"Democracies aren't overthrown; they're given away." -George Lucas
“We only protect what we love, we only love what we understand, and we only understand what we are taught.” - Jacques Cousteau
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

zxys001 wrote: Fri May 07, 2021 11:30 am The Big Easy is great!... I have the one with the hood.
I like that the new ones like that come with a place to put wood chips. Mine is just a fryer.
User avatar
zxys001
Posts: 1077
Joined: Fri Apr 02, 2021 10:08 am
Answers: 5
Location: Scotts Valley, Ca.
x 2305
x 998
Contact:

Re: Watercooler Talk

Unread post by zxys001 »

mattpeneguy wrote: Fri May 07, 2021 12:28 pm I like that the new ones like that come with a place to put wood chips. Mine is just a fryer.
My fav is still cherry but nearly all have been worth using,.. the smoke flavor definitely translates well.
With yours,.. maybe suspend a basket/box of chips near the mid/bottom?
"Democracies aren't overthrown; they're given away." -George Lucas
“We only protect what we love, we only love what we understand, and we only understand what we are taught.” - Jacques Cousteau
User avatar
zxys001
Posts: 1077
Joined: Fri Apr 02, 2021 10:08 am
Answers: 5
Location: Scotts Valley, Ca.
x 2305
x 998
Contact:

Re: Watercooler Talk

Unread post by zxys001 »

Not sure how you guys feel/think about doge but... wth.. this whole *coin smells of pyramid scheme slime all over it. And, don't get me wrong.. I'd luv to see the bank system collapse.
Attachments
download (9).jpg
"Democracies aren't overthrown; they're given away." -George Lucas
“We only protect what we love, we only love what we understand, and we only understand what we are taught.” - Jacques Cousteau
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

This is just too easy...
image.png
User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

zxys001 wrote: Fri May 07, 2021 1:48 pm Not sure how you guys feel/think about doge but... wth.. this whole *coin smells of pyramid scheme slime all over it. And, don't get me wrong.. I'd luv to see the bank system collapse.
As always, take your profit and run.
User avatar
Ömür Tokman
Posts: 361
Joined: Sat Mar 13, 2021 3:49 am
Answers: 1
Location: İstanbul-Türkiye
x 994
x 347
Contact:

Re: Watercooler Talk

Unread post by Ömür Tokman »

Young people today announced the green card results. I cannot login because the site is very busy. I am waiting for your prayers.
@matt
@mattpeneguy
@Glenn Schroeder
@Rob
@AlexLachance
@Frederick_Law
@dpihlaja
@Tom G
@Roasted By John
etc... Please.
You ˹alone˺ we worship and You ˹alone˺ we ask for help.
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

Ömür Tokman wrote: Sat May 08, 2021 4:06 pm Young people today announced the green card results. I cannot login because the site is very busy. I am waiting for your prayers.
@matt
@mattpeneguy
@Glenn Schroeder
@Rob
@AlexLachance
@Frederick_Law
@dpihlaja
@Tom G
@Roasted By John
etc... Please.
Absolutely!
I hope it comes through for you this time!
User avatar
Ömür Tokman
Posts: 361
Joined: Sat Mar 13, 2021 3:49 am
Answers: 1
Location: İstanbul-Türkiye
x 994
x 347
Contact:

Re: Watercooler Talk

Unread post by Ömür Tokman »

Thanks a lot @mattpeneguy
You ˹alone˺ we worship and You ˹alone˺ we ask for help.
User avatar
AlexLachance
Posts: 2190
Joined: Thu Mar 11, 2021 8:14 am
Answers: 17
Location: Quebec
x 2375
x 2015

Re: Watercooler Talk

Unread post by AlexLachance »

Ömür Tokman wrote: Sat May 08, 2021 4:06 pm Young people today announced the green card results. I cannot login because the site is very busy. I am waiting for your prayers.
@matt
@mattpeneguy
@Glenn Schroeder
@Rob
@AlexLachance
@Frederick_Law
@dpihlaja
@Tom G
@Roasted By John
etc... Please.
Wishing you good luck!
User avatar
matt
Posts: 1589
Joined: Mon Mar 08, 2021 11:34 am
Answers: 19
Location: Virginia
x 1219
x 2372
Contact:

Re: Watercooler Talk

Unread post by matt »

Ömür Tokman wrote: Sat May 08, 2021 4:06 pm Young people today announced the green card results. I cannot login because the site is very busy. I am waiting for your prayers.
@matt
@mattpeneguy
@Glenn Schroeder
@Rob
@AlexLachance
@Frederick_Law
@dpihlaja
@Tom G
@Roasted By John
etc... Please.

Best of luck. Really, people like you coming in should be a no brainer. If they have any sense, they will help you. Plus, I have to say, thanks for doing this the right way, even though it's frustrating. We get so many people doing it the wrong way and getting rewarded for it, with much less to offer than you have.
User avatar
mike miller
Posts: 878
Joined: Fri Mar 12, 2021 3:38 pm
Answers: 7
Location: Michigan
x 1070
x 1231
Contact:

Re: Watercooler Talk

Unread post by mike miller »

Just saw this as I took a quick swipe through the Swamp. https://r1132100503382-eu1-3dswym.3dexp ... TpjbtHIIOQ

Just wait for the suggestion for a one-click-color-match to make the Top Ten List.

<()> <()> <()>

In case you don't want to wander in....
2021-05-10 16_45_48.jpg
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
User avatar
mike miller
Posts: 878
Joined: Fri Mar 12, 2021 3:38 pm
Answers: 7
Location: Michigan
x 1070
x 1231
Contact:

Re: Watercooler Talk

Unread post by mike miller »

Fun, fun... ;;
2021-05-10 17_10_33.jpg
2021-05-10 17_10_33.jpg (14.2 KiB) Viewed 10537 times
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
User avatar
Ömür Tokman
Posts: 361
Joined: Sat Mar 13, 2021 3:49 am
Answers: 1
Location: İstanbul-Türkiye
x 994
x 347
Contact:

Re: Watercooler Talk

Unread post by Ömür Tokman »

matt wrote: Mon May 10, 2021 8:54 am Best of luck. Really, people like you coming in should be a no brainer. If they have any sense, they will help you. Plus, I have to say, thanks for doing this the right way, even though it's frustrating. We get so many people doing it the wrong way and getting rewarded for it, with much less to offer than you have.
Thank you all very much.
First of all, I have a nice family, no matter what happens, everything must be legal, I can't risk them.
Result! it didn't happen this year,
Maybe with H2b visa if I can find a sponsoring company.
I am planning to research the UK this year.
You ˹alone˺ we worship and You ˹alone˺ we ask for help.
User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

mike miller wrote: Mon May 10, 2021 5:11 pm Fun, fun... ;;

2021-05-10 17_10_33.jpg
Are you stirring the right pot?
User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

Got my vaccine last night. Still alive.
User avatar
matt
Posts: 1589
Joined: Mon Mar 08, 2021 11:34 am
Answers: 19
Location: Virginia
x 1219
x 2372
Contact:

Re: Watercooler Talk

Unread post by matt »

Ömür Tokman wrote: Tue May 11, 2021 4:48 am Thank you all very much.
First of all, I have a nice family, no matter what happens, everything must be legal, I can't risk them.
Result! it didn't happen this year,
Maybe with H2b visa if I can find a sponsoring company.
I am planning to research the UK this year.
Sorry about that, Ömür. I don't know if it would help to use this place or some of its members as reference. You've been around for a while, and have been a contributor, and that should be easy to verify. Best of luck, whatever happens.
User avatar
zxys001
Posts: 1077
Joined: Fri Apr 02, 2021 10:08 am
Answers: 5
Location: Scotts Valley, Ca.
x 2305
x 998
Contact:

Re: Watercooler Talk

Unread post by zxys001 »

Ömür Tokman wrote: Tue May 11, 2021 4:48 am Thank you all very much.
First of all, I have a nice family, no matter what happens, everything must be legal, I can't risk them.
Result! it didn't happen this year,
Maybe with H2b visa if I can find a sponsoring company.
I am planning to research the UK this year.
yeah, sorry Omur.
persistence is a virtue.
good luck with the UK.
"Democracies aren't overthrown; they're given away." -George Lucas
“We only protect what we love, we only love what we understand, and we only understand what we are taught.” - Jacques Cousteau
User avatar
AlexLachance
Posts: 2190
Joined: Thu Mar 11, 2021 8:14 am
Answers: 17
Location: Quebec
x 2375
x 2015

Re: Watercooler Talk

Unread post by AlexLachance »

Ömür Tokman wrote: Tue May 11, 2021 4:48 am Thank you all very much.
First of all, I have a nice family, no matter what happens, everything must be legal, I can't risk them.
Result! it didn't happen this year,
Maybe with H2b visa if I can find a sponsoring company.
I am planning to research the UK this year.
It's just too bad, keep up your optimism, they don't know who they're missing out on.

Maybe Canada could be an alternative for you too, though you might not enjoy it's winters :lol:
MJuric
Posts: 1070
Joined: Mon Mar 08, 2021 3:21 pm
Answers: 1
x 31
x 874

Re: Watercooler Talk

Unread post by MJuric »

matt wrote: Mon May 10, 2021 8:54 am Best of luck. Really, people like you coming in should be a no brainer. If they have any sense, they will help you. Plus, I have to say, thanks for doing this the right way, even though it's frustrating. We get so many people doing it the wrong way and getting rewarded for it, with much less to offer than you have.
Not to go all political which I know is a no no, but the entire process to citizen ship in the US is broken.

I had a friend that was a very talented programmer. Worked with several large corps do very "Mission Critical" projects, Home Depot size companies. He had spent thousands of dollars on his citizen ship process. Had remained gainfully employed for over six years on 2-3 projects like the above. Six weeks before he got his citizenship he was laid off largely because the project he was working on was completed. He had to find a new job before the date came up or he was going to be denied and possibly deported.

Luckily he found one, cross country, had to move etc etc in six weeks.

I'm staying away from politics as much as is possible here but I think we can all pretty much agree that the system from crossing the border illegally to bringing in highly skilled labor....ain't workin' well.
User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

Well, we're open for all positive person here .....
User avatar
Tony Tieuli
Posts: 23
Joined: Mon Mar 08, 2021 3:22 pm
Answers: 0
Location: Massachusetts, USA
x 446
x 64

Re: Watercooler Talk

Unread post by Tony Tieuli »

Ömür Tokman wrote: Tue May 11, 2021 4:48 am Thank you all very much.
First of all, I have a nice family, no matter what happens, everything must be legal, I can't risk them.
Result! it didn't happen this year,
Maybe with H2b visa if I can find a sponsoring company.
I am planning to research the UK this year.
I'm very sorry it didn't happen for you this year Nephew! :(
Keep trying and please don't give up on the USA! Of course if the UK works for you go for it!
User avatar
Ömür Tokman
Posts: 361
Joined: Sat Mar 13, 2021 3:49 am
Answers: 1
Location: İstanbul-Türkiye
x 994
x 347
Contact:

Re: Watercooler Talk

Unread post by Ömür Tokman »

Frederick_Law wrote: Tue May 11, 2021 10:36 am Well, we're open for all positive person here .....
my tests were negative. I didn't know that Canada is bringing people who are positive into the country. now my first job will be to kiss covid patients until they get positive. when i am positive i will come to canada. ><
You ˹alone˺ we worship and You ˹alone˺ we ask for help.
User avatar
Tom G
Posts: 355
Joined: Tue Mar 09, 2021 9:26 am
Answers: 0
Location: Philadelphia, PA area
x 989
x 466

Re: Watercooler Talk

Unread post by Tom G »

Ömür Tokman wrote: Tue May 11, 2021 11:04 am my tests were negative. I didn't know that Canada is bringing people who are positive into the country. now my first job will be to kiss covid patients until they get positive. when i am positive i will come to canada.
I'd take FLaw's comments with skepticism. He may have meant a positive attitude. Don't do anything drastic or dangerous.
User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

We had been telling Mr.T to close the border from the beginning.
Traveller can walk off the airport without check or quarantine.
We still have no proof that closing airport will reduce spread.
So we're positively welcome all positive.
User avatar
AlexLachance
Posts: 2190
Joined: Thu Mar 11, 2021 8:14 am
Answers: 17
Location: Quebec
x 2375
x 2015

Re: Watercooler Talk

Unread post by AlexLachance »

Frederick_Law wrote: Tue May 11, 2021 11:13 am We had been telling Mr.T to close the border from the beginning.
Traveller can walk off the airport without check or quarantine.
We still have no proof that closing airport will reduce spread.
So we're positively welcome all positive.
Kid Kodak's not much of a reference when it comes to politics :lol:
User avatar
mike miller
Posts: 878
Joined: Fri Mar 12, 2021 3:38 pm
Answers: 7
Location: Michigan
x 1070
x 1231
Contact:

Re: Watercooler Talk

Unread post by mike miller »

Just noticed your post count, @matt. :lol:
666.jpg
666.jpg (26.25 KiB) Viewed 10336 times
()
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
User avatar
zwei
Posts: 701
Joined: Mon Mar 15, 2021 9:17 pm
Answers: 18
Location: Malaysia
x 185
x 600

Re: Watercooler Talk

Unread post by zwei »

mike miller wrote: Wed May 12, 2021 8:43 am Just noticed your post count, @matt. :lol:

666.jpg

()
Lets all give him 90 more likes so that it become

666
444
999
?
**
Far too many items in the world are designed, constructed and foisted upon us with no understanding-or even care-for how we will use them.
User avatar
mike miller
Posts: 878
Joined: Fri Mar 12, 2021 3:38 pm
Answers: 7
Location: Michigan
x 1070
x 1231
Contact:

Re: Watercooler Talk

Unread post by mike miller »

Look who's here! @Dennis Bacon

>< ><
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

Yes, use paper bag and cardboard box. More environmental friendly.
Use BPA free container.
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

Frederick_Law wrote: Wed May 12, 2021 3:27 pm Yes, use paper bag and cardboard box. More environmental friendly.
Use BPA free container.
Last time around, I was joking about filling up the bed of my pickup truck with gas...
User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

You should fill the tires.
Dump engine oil, coolant, windshield washer and fill with gas.
Let me know when you do it. I'll live stream it.
User avatar
Frederick_Law
Posts: 1948
Joined: Mon Mar 08, 2021 1:09 pm
Answers: 8
Location: Toronto
x 1639
x 1471

Re: Watercooler Talk

Unread post by Frederick_Law »

Ok, time to take a SwYm.
User avatar
mattpeneguy
Posts: 1386
Joined: Tue Mar 09, 2021 11:14 am
Answers: 4
x 2489
x 1899

Re: Watercooler Talk

Unread post by mattpeneguy »

Frederick_Law wrote: Wed May 12, 2021 6:16 pm Ok, time to take a SwYm.
Good luck...
drown.gif
drown.gif (624.73 KiB) Viewed 10262 times
User avatar
mike miller
Posts: 878
Joined: Fri Mar 12, 2021 3:38 pm
Answers: 7
Location: Michigan
x 1070
x 1231
Contact:

Re: Watercooler Talk

Unread post by mike miller »

Breakfast at work. We do this about every week.... :P
2021-05-13 08_40_36.jpg
He that finds his life will lose it, and he who loses his life for [Christ's] sake will find it. Matt. 10:39
User avatar
AlexLachance
Posts: 2190
Joined: Thu Mar 11, 2021 8:14 am
Answers: 17
Location: Quebec
x 2375
x 2015

Re: Watercooler Talk

Unread post by AlexLachance »

mike miller wrote: Thu May 13, 2021 8:41 am Breakfast at work. We do this about every week.... :P

2021-05-13 08_40_36.jpg
That's pretty friggin' awesome. I bring cookies every thursday for my department, makes people happy and doesn't cost much.

Haven't brought any since COVID though, the ridiculousness is still going on in Canada.
User avatar
SamSpade
Posts: 115
Joined: Tue Mar 23, 2021 3:34 pm
Answers: 2
Location: Montreal, QC
x 223
x 155

Re: Watercooler Talk

Unread post by SamSpade »

mike miller wrote: Thu May 13, 2021 8:41 am Breakfast at work. We do this about every week.... :P

2021-05-13 08_40_36.jpg
bacon.jpg
You miss 100% of the shots you don't take - Wayne Gretzky
Post Reply